| |
|
|
Authorized distributor for Huntsman Structural Adhesives
Agomet Structural Adhesives
This range of adhesives are mainly 2-component, solvent free reactive acrylic
systems.
These systems are fast curing after the addition of an initiator (hardener),
the components quickly react with one another, forming a high-strength polymer
network
By varying the amount of hardener added, the working time can be adjusted, without
appreciably affecting the cured properties.
A variety of application techniques can be used including no-mix where contact
of resin and hardener is enough to initiate cure.
Advantages:
· A choice of simple processing methods for
room temperature application
· Rapid fixing and handling
· Good gap filling
· Minimal surface preparation
· High chemical resistance
· High tensile and shear strength
· Good heat resistance
For further information please refer to the downloadable
brochure.
| F300 (MMA) |
Very fast (1-2 minutes), gap filling capability. |
| F305 (MMA). |
Very fast (1-2 minutes), ideal for
ferrites |
| F307 (MMA) |
Fast (3-4 minutes), low shrinkage,
good for ferrite bonding. |
| F310 (MMA) |
Gap filling with 10 minute working
life. |
| F311 (MMA) |
Gap filling with 20 minute working
life. |
| F315 (MMA) |
Transparent in thin layers, 8-12 minutes
working life. |
| F330 (MMA) |
High temperature resistance with gap
filling capability, 11-15 minutes working life. |
| 2047 (MMA) |
For surfaces with poor adhesion, gap
filling, 8-10 minutes working life. |
| A350 (Acrylate) |
Extremely low odour, metal bonding,
9-13 minutes working life. |
| P79 (EP) |
For aluminium profiles, 40-60 minutes
working life. |
| PU650 (PU) |
For aluminium profiles, 45 minutes
working life. |
| |
| Agomet U3 |
| Agomet U4 |
| Agovit 1900 |
| Agovit Fluid |
| Hardener Paste |
| Hardener powder |
| Hardener Lacquer |
|
|
|
